Rally computer multifunction AZIMUTH

Rally computer multifunction AZIMUTH is a precise, dust and water resistant tripmeter designed for rallies. It is equipped with easily readable LED display which at the same time shows all the measured parameters. Tripmeter is operated by a 6-button, backlit keyboard.

Multifunction AZIMUTH device routes waypoints on the basis of distance and the course to the destination and then indicates the direction. Multifunction AZIMUTH displays values indicating the distance and the course to the destination and is intended for off-road rallies.

Rally computer multifunction AZIMUTH

The tripmeter is designed for cars as well as motorcycles and quads.

The tripmeter is designed for cars as well as motorcycles and quads. Azimuth is equipped with ultra-fast GPS module supporting up to 48 channels. The module is used to determine the position during the routing process. Thanks to the fast GPS module, routing waypoints can be done also while driving at any speed.

Sending and routing a waypoint using the Rally computer multifunction takes just 1 second!!! At each point you can save about 20 seconds.

The tripmeter can cooperate with one external reseter or four button wheel mounted reseter.

Azimuth has convenient mounting points which make it easily mountable in any vehicle.

Waypoint routing in Garmin based on azimuth and distance

At the time of routing each waypoint, AZIMUTH sends a routing order to the connected Garmin. In this solution, the route guidance is performed on the screen of AZIMUTH device and on the Garmin screen.

20130926 ekran nieb neg v2 20130926 ekran zielony poz v2
Screen in navigation mode.

Scren in routing stanby mode.

Displayed on the device screen is an easily readable indicator of direction to destination.

Tripmeter functions in AZIMUTH device.

It is possible to integrate the AZIMUTH device with the functions of Rally computer multifunction TRIPMETER. All the tripmeter functions are then available in azimuth.

The integration enhances the possibilities and speeds up navigation by road book. 

Working with repeater

Rally computer multifunction can work as the main tripmeter for Rally computer 3+ acting as a repeater. In each of the operating modes of the main tripmeter, the leading measure: TRIP STOPER or AZC (course to the destination) is automatically sent to repeater. At any time, any measured parameter can be sent to repeater.

Functions :

  • In-built GPS1
  • Creating files with azimuths on the device
  • Creation of files with azimuths on PC
  • The possibility of routing waypoints in cable connected Garmin device
  • Road sensor input
  • Contrasting LCD display and backlit buttons
  • Digital protection of settings and measurements memory
  • Easily readable indication of GPS status and range1

1 version with GPS module

  • route (bearings) indication1
  • optional external repeater
  • Possibility of updating firmware by USB flash drive memory
  • Possibility of extending functions to include tripmeter functions

 

User guide