Tripmeter Rally computer: 2 +

Tripmeter Rally computer 2 + is a precise, dust and water resistant tripmeter designed for rallies. The tripmeter is equipped with easily readable LED display which shows the parameter. It is operated by 3-button backlit keyboard.

Tripmeter Rally computer 2+ measures and displays the following values: road distance, speed, time, voltage, route direction (bearing). In conjunction with waypoint routing function it is designed for off-road rallies.

 Tripmeter Rally computer 2 500

The tripmeter is designed primarily for motorcycles or quads, but it can be also be useful in cars.


The tripmeter can be equipped with ultra-fast GPS module supporting up to 48 channels. The module helps in calculating road distance or does it all on its own. With this solution it suffices to connect the tripmeter only to the power source.

The tripmeter can be also connected to any type of speed sensor.

Measured values of distance travelled are shown with a resolution of 10 m. Quick adjustment of ODO route is also carried out at the same resolution.

Road counting may be done in two directions. It is possible to switch over into countback mode (counting backwards).

The tripmeter can cooperate with one external reseter or four button wheel mounted reseter.

The tripmeter has convenient mounting points which make it easy to mount it in any vehicle.

Tripmeter Rally computer 2 rear mounting points 500

Waypoints routing in Garmin based on the azimuth and the distance.

Tripmeter Rally computer 2 Garmin 500

In case when Rally computer has a GPS module, it is possible to equip it with Garmin waypoint routing function. To do this one has to select from the tripmeter memory the previously created "azimuth grid" and set the routing, which will result in showing ready-made waypoint on the connected Garmin device.

Thanks to this function, the routing time can be shortened to approx. 3 seconds necessary to select the "grate from memory". Routing can be also done while driving at any speed.

We create a file on a PC with Windows, Mac OS, on the phone or tablet with Android. What is required is any program that can create txt file. For Windows - Notepad, on Android - TextEdit. We enter the file using USB flash drive. It is the only possibility of placing a file into tripmeter. It is not possible to enter azimuths manually. The tripmeter can hold a file containing up to 999 azimuths.

View of the file with explanations:

 Tripmeter Rally computer 2 create azimuth file

Sample file (to download the file use the function: save target as...): download

Functions :

  • built-in GPS1
  • Two independent road counters with the possibility of deleting
  • the maximum road distance - from 99.99 km to 9999.9 km
  • possibility to correct a long road - fast correction after +/- 10 m
  • road sensor input
  • in case of sensors failure, the possibility of switching over to GPS counting1
  • ultra bright displays and backlit buttons
  • digital protection of settings and measurements memory
  • easily readable GPS signalling of status and range1

1 version with GPS module

  • speed indication
  • route (bearings) indication1
  • Indication of voltage in the vehicle network
  • manual or automatic1 calibration
  • memory of up to 10 calibration coefficients
  • the possibility of changing coefficient during measurement
  • optional external repeater
  • possibility of changing the counting direction (forward/backwards)
  • possibility of updating firmware by USB flash drive memory
  • possibility of extending functions to include waypoint routing based on the azimuth and the distance

 

 

Possibility of widening functions

AZIMUTH – additionally waypoint routing, that is connecting functions tripmeter and waypoint routing

Films

AZI function operations

Download:

Video support
Manual + diagrams